- Main loss in the production process of high humidity-resistant exterior plywood
- Correct maintenance and storage of the brown film faced plywood for formwork
- Inspection method for quality of black film faced plywood for construction
- Okoume BS1088 marine grade plywood transport considerations
- Use and handling of marine plywood for boat and yacht building
Main loss in the production process of high humidity-resistant exterior plywood
In the whole production process of high humidity-resistant exterior plywood, core drying, blanking, hot pressing, trimming and sanding have an impact on wood loss. It is divided into tangible loss and intangible loss. Wood loss is related to factors such as the original wood species, log specifications, equipment status, process technology, and finished board specifications.
High-humidity outdoor plywood has a high moisture content after core-cutting, and the core plate must be dried to meet the requirements of the gluing process. After drying, the wood becomes smaller in size and is called dry shrinkage. As the moisture content decreases, the length, width and thickness of the core sheet shrink. The shrinkage loss is related to the tree species of the core board, the moisture content of the core board, and the thickness of the core board. The shrinkage loss rate is generally 4% to 10%.
High-humidity outdoor plywood assembly finishing includes shearing, paneling and repairing. The dried strip core plate and the zero core plate are cut into a standard core plate and a splicable core plate, and the narrow core plate is spliced into a whole core plate, and the defective whole core plate can be repaired to achieve the process. Quality requirements. The amount of waste core board produced by this process is mainly related to the operator's familiarity with the core board standard and the quality of the core board. The loss rate is generally 2% to 4%.
The hot pressing of the high-humidity outdoor plywood is to firmly glue the slabs of the glued assembly to a certain temperature and a certain pressure. As the slab temperature and moisture content change during hot pressing, the wood is gradually compressed and the slab thickness is gradually reduced. The loss is compression loss, which is related to the hot pressing temperature, unit pressure, hot pressing time, tree species and water content of the plywood. The loss rate is generally 3% to 8%.
Next: This is the last one
- Correct maintenance and storage of the brown film faced plywood for formwork 06-27
- Inspection method for quality of black film faced plywood for construction 06-24
- Use and handling of marine plywood for boat and yacht building 06-24
- Okoume BS1088 marine grade plywood transport considerations 06-22
- Introduction and properties of marine plywood for engineering material 06-22
- Transportation and installation precautions for brown film faced plywood for concrete building 06-14
- How to understand the principle of symmetry of exterior plywood 06-14
- Marine plywood adhesive production process 06-05
- Plywood bonding strength and classification 04-09
- Instructions for the use of marine plywood products 03-20